Headphones Dude

Skullcandy Dime Not Pairing Together (Fixed)

I have been using Skullcandy Dime earbuds for a few months and they are working fine until one day when they were not pairing together. However, I researched online and figured out how to fix them.

So, if you are in the same situation here is how to fix them.

If your Skullcandy Dime earbuds are not pairing together, it could be due to software glitches, low battery of the buds and case and outdated firmware. To troubleshoot pairing problem, you will need to restart or reset your earbuds, charge earbuds and their case and update firmware to latest version.

If you did not understand what to do on each step then read on.

Skullcandy Dime Not Pairing Together

skullcandy dime not charging

1. Reset Skullcandy Dime

Skullcandy dime can stop pairing together because of software glitches or bugs. Therefore you should reset your earbuds. 

Follow the below steps to reset your Skullcandy dime earbuds.

Turn on both buds by removing them from the charging case.

skullcandy dime not pairing together

Unpair earbuds from your device.

Press the button on both buds two times and hold for 2 seconds.

skullcandy dime not pairing together

After that, the earbuds will automatically reset.

After a successful reset, place earbuds in the charging case and remove them from the case to pair both buds to each other.

2. Restart Skullcandy Dime

Restart can also remove minor glitches and bugs from the earbuds. 

Follow the below steps to restart your Skullcandy dime earbuds.

  1. Remove earbuds from the charging case.
  2. Then press and hold the earbuds button for more than 4 seconds to turn off.
  3. Again press and hold the button for 2 seconds to turn it on.

3. Audio not Playing Together

If audio is not coming from both earbuds, then you should re-sync your earbuds.

Follow the below steps to re-sync Skullcandy dime.

  1. Turn on the earbuds by removing them from the charging case or press and hold the earbuds button for 2 seconds.
  2. After that, press the button on both buds 4 times to pair both earbuds.
  3. While pairing earbuds will flash red and blue, on successful pairing, you will hear a voice prompt, and only the left bud will flash blue.

4. Charge Case and Earbuds

skullcandy dime not pairing together

Sometimes one earbud battery is low; because of that, it doesn’t connect to another.

In some cases, due to the low battery of the charging case, earbuds don’t charge.

Also, sometimes one bud doesn’t charge because its charging poles are covered with dirt or the side charging pins are covered with dirt or debris.

Therefore, you should ensure your earbuds charging poles and charging case pins are clean. You can clean your earbuds by pouring few drops of alcohol on the cotton cloth.

This way, both earbuds will fully charge and quickly pair together. Your dime earbuds will take 1 hour to fully charge, and their charging case will take 5 hours to charge.

5. Update Firmware

In rare cases, outdated firmware can be the reason for the pairing problem.

Also, updating the firmware will remove minor glitches and bugs from the buds. Therefore you should update your Skullcandy dime firmware.

Follow the steps to update your Skullcandy dime firmware.

  1. Download and install the Skullcandy app.
  2. Pair your Skullcandy dime earbuds with the phone and app.
  3. Open the app and go to the notification.
  4. If an update is available, then click update and complete the process.

Conclusion

If your Skullcandy Dime buds are not pairing together you will need to try these steps.

  • Reset your earbuds.
  • Re-pair both buds.
  • Charge the case and earbuds.
  • Update the firmware to latest version.

If none of the above work for your earbuds. You should contact Skullcandy customer support for further help or return them if they are under warranty.

FAQs

How to Pair Skullcandy Dime Together?

Here is how you can pair Skullcandy dime together.

  1. Charge earbuds for 30 minutes.
  2. Then remove both buds from the charging case.
  3. They will automatically turn on and begin pairing with each other.
  4. On successful pairing, the left earbud will start flashing blue.

Why are my Skullcandy pairs not working together?

Hold both of them, ideally while wearing them, for ten seconds while they are off to hear them turn on, try to pair, and then shut off once more. – Put the earbuds back in the case, shut the cover, then take them out and put them in your ears. – The buds will activate on their own

How to Fix Skullcandy Indy Evo Not Pairing Together